: The Power Switch is non-polarized, so it doesn't matter which wire goes to Pin 5 and which to Pin 6. However, the LEDs are polarized; ensure the positive wire (+) goes to the odd-numbered pin. The Reset Switch is often optional as many HP cases don’t include it.
It is a proprietary board manufactured by (a spin-off of ASUS) exclusively for HP (Hewlett-Packard). You will typically find this board inside:
The IPM17-002 motherboard is a high-quality, ATX-form-factor motherboard designed to support a wide range of Intel processors, including Core i7, Core i5, and Core i3 models. This motherboard boasts an impressive array of features, including support for DDR3 memory, USB 3.0 and 2.0 ports, SATA 6Gb/s and 3Gb/s connectors, and high-quality audio and LAN capabilities. ipm17-002 motherboard manual
Since the IPM17-002 lacks a clear silkscreen, the manual provides the definitive jumper map.
The lights in the archive flickered and stayed on. High above, the city’s climate shields stabilized. : The Power Switch is non-polarized, so it
| Pin | Signal | | :-- | :--- | | 1 | HDD LED + | | 2 | HDD LED - | | 3 | Power LED + | | 4 | Power LED - | | 5 | Power Switch | | 6 | Power Switch (GND) | | 7 | Reset Switch | | 8 | Reset Switch (GND) |
If you are moving the motherboard to a new case, the 9-pin Front Panel Header (located at the bottom right) is crucial. Based on: HDD LED + Pin 2: HDD LED – Pin 3: Power LED + Pin 4: Power LED – Pin 5: Power Button Pin 6: Power Button return (GND) Pin 7: Reset Switch Pin 8: Reset return (GND) Pin 9: Reserved (NC) Pin 10 (or missing pin): Key (no pin) It is a proprietary board manufactured by (a
Standard 24-pin ATX power connector and a 4-pin CPU power connector. Processor and RAM Support
To clear the Real Time Clock (RTC) RAM, move the designated jumper cap from the default position to the clear position for 5–10 seconds while the PC is off and unplugged, then return it to default.
2 x DDR4 DIMM slots (Dual Channel, Non-ECC, Unbuffered)