Stk412530 Datasheet

If you are looking for the "STK412-530 datasheet" for repair or design purposes, this article breaks down the essential technical specifications, pin configurations, and application insights. 1. Key Features and Specifications

The recommended operating range is ±18 V to ±36 V . For a 4‑ohm load, it is safest to stay at the lower end (e.g., ±24 V to ±28 V) to avoid exceeding the IC’s current limits. For 8‑ohm loads, ±28 V to ±36 V provides an excellent balance of power and reliability.

| Parameter | Condition | Min | Typ | Max | Unit | | :--- | :--- | :--- | :--- | :--- | :--- | | Quiescent Current | No signal | - | 45 | 80 | mA | | Output Power (1) | THD = 0.4% | 45 | 50 | - | W | | Output Power (2) | ( V_CC = \pm 30V), (R_L=6\Omega) | - | 40 | - | W | | Total Harmonic Distortion | ( P_O = 0.5W) to 40W | - | 0.08 | 0.4 | % | | Frequency Response | ( P_O = 1W), -3dB | 20 | - | 50k | Hz | | Input Impedance | | 30 | 50 | - | kΩ | | Voltage Gain | | 90 | 100 | 110 | (40dB typ) | | Output Noise Voltage | ( R_g = 10k\Omega ), IHF-A | - | 1.2 | 2 | mVrms | | Channel Separation | ( f=1kHz ) | - | 65 | - | dB | stk412530 datasheet

The STK412-530 stands out in audio applications due to its advanced architecture:

The actual output power of the STK412-530 is a subject of lively discussion in the DIY community. While some third-party sellers advertise ratings as high as 200W, real-world measurements and factory specifications provide more nuanced figures: If you are looking for the "STK412-530 datasheet"

: SIP-18 / SIP-ZIP (Single In-line Package with staggered zigzag leads).

The electrical characteristics of the STK412-530 are as follows: For a 4‑ohm load, it is safest to stay at the lower end (e

The STK412-530 features a multi-pin single in-line layout. Accurate tracking of these pins is vital during troubleshooting or PCB trace routing.

The STK412-530 is a 2-channel (stereo) audio power amplifier IC. It is housed in a compact, SIP (Single In-line Package) with a built-in aluminum heat sink plate. The primary design goal of this IC series is to minimize heat generation while maintaining high fidelity audio.

Read Now

For better experience 💚

Please rotate your device to landscape mode

Stk412530 Datasheet

Download, edit, and share the charts freely — no credits needed 💚

If you are looking for the "STK412-530 datasheet" for repair or design purposes, this article breaks down the essential technical specifications, pin configurations, and application insights. 1. Key Features and Specifications

The recommended operating range is ±18 V to ±36 V . For a 4‑ohm load, it is safest to stay at the lower end (e.g., ±24 V to ±28 V) to avoid exceeding the IC’s current limits. For 8‑ohm loads, ±28 V to ±36 V provides an excellent balance of power and reliability.

| Parameter | Condition | Min | Typ | Max | Unit | | :--- | :--- | :--- | :--- | :--- | :--- | | Quiescent Current | No signal | - | 45 | 80 | mA | | Output Power (1) | THD = 0.4% | 45 | 50 | - | W | | Output Power (2) | ( V_CC = \pm 30V), (R_L=6\Omega) | - | 40 | - | W | | Total Harmonic Distortion | ( P_O = 0.5W) to 40W | - | 0.08 | 0.4 | % | | Frequency Response | ( P_O = 1W), -3dB | 20 | - | 50k | Hz | | Input Impedance | | 30 | 50 | - | kΩ | | Voltage Gain | | 90 | 100 | 110 | (40dB typ) | | Output Noise Voltage | ( R_g = 10k\Omega ), IHF-A | - | 1.2 | 2 | mVrms | | Channel Separation | ( f=1kHz ) | - | 65 | - | dB |

The STK412-530 stands out in audio applications due to its advanced architecture:

The actual output power of the STK412-530 is a subject of lively discussion in the DIY community. While some third-party sellers advertise ratings as high as 200W, real-world measurements and factory specifications provide more nuanced figures:

: SIP-18 / SIP-ZIP (Single In-line Package with staggered zigzag leads).

The electrical characteristics of the STK412-530 are as follows:

The STK412-530 features a multi-pin single in-line layout. Accurate tracking of these pins is vital during troubleshooting or PCB trace routing.

The STK412-530 is a 2-channel (stereo) audio power amplifier IC. It is housed in a compact, SIP (Single In-line Package) with a built-in aluminum heat sink plate. The primary design goal of this IC series is to minimize heat generation while maintaining high fidelity audio.