Jinka Jk 1351 Driver Software ((full)) Jun 2026

Limited support; typically requires specific FTDI driver updates and compatible software like DragonCut. Recommended Design Software

This indicates a mismatch between the computer’s assigned port and the software's destination port.

provides direct Google Drive links for various models, including the JK and XL series. PlotCalc (CorelDRAW Plugin) : If you use CorelDRAW, the PlotCalc Software

The Jinka JK-1351 typically uses a USB-to-Serial connection. This means that even though you are plugging a USB cable into your laptop, your computer sees it as a COM port (Serial port). To make this work, you need a specific bridge driver—most commonly the or FTDI chipset driver. 📍 Key Software Components USB Driver: Links the hardware to Windows. jinka jk 1351 driver software

If the automatic installation fails, go to Device Manager, right-click the unknown device, select "Update Driver," and choose "Browse my computer for drivers." Navigate to the driver folder you downloaded.

Jinka cutting plotters manufactured over the years generally use one of two primary USB-to-Serial emulation chips. To make your computer recognize the cutter, you must install the driver that matches your specific machine's internal chip: The CH340 / CH341 Chipset (Most Common)

Highly professional sign-making software. PlotCalc (CorelDRAW Plugin) : If you use CorelDRAW,

| Error Message / Issue | Possible Cause | Troubleshooting Steps | | :--- | :--- | :--- | | (Windows) | Faulty USB cable, wrong port, driver not installed | Try a different USB cable and port. Reinstall the driver. | | Driver is not intended for this platform | Trying to install a 32-bit driver on 64-bit Windows | Download a 64-bit driver or use an alternative method like InkScape/PySerial. | | Plotter not cutting correctly (e.g., incomplete cut) | Incorrect cutting force (Force) or speed (Speed) settings | Adjust the Force and Speed settings on the plotter's control panel. Increase Force slightly. | | Driver installation freezes or fails | Conflicting old driver installation | Use the "Have Disk" method during manual installation to point directly to the .inf file. |

In your cutting software (SignMaster/ArtCut), go to and match the COM port to the one found in Device Manager. Common Troubleshooting Issues ❌ Machine Not Responding

Open Device Manager -> Ports -> Right-click your COM Port -> Properties -> Port Settings -> Advanced . Lower the Receive Buffer and Transmit Buffer sliders to their lowest settings. Ensure Flow Control in your software is set to Hardware . 📍 Key Software Components USB Driver: Links the

Follow these steps to ensure a clean installation on Windows 10 or 11. 1. Download the Correct Driver Most Jinka machines utilize the .

Follow these steps to safely download and install the controller software on Windows (the primary operating system for this hardware). Step 1: Download the Correct Chipset Driver

Installing the driver software correctly is the first hurdle. Follow these general steps for a smooth setup on a Windows PC.