Visit the samuelcarreira GitHub Repository which hosts archived x64 drivers specifically tailored for this hardware. Click the green button and select Download ZIP .
Use the (often called "EasyCAP Drivers" by the open-source community). This driver is signed and works on Windows 10 x64 versions 1809 through 24H2.
If you want a lightweight solution simply to view or quickly record the feed: Open VLC and go to > Open Capture Device . Set the Capture mode to DirectShow .
For Somagic SMI2021 ChipsetsThe Somagic variant is notoriously difficult. You will need the Somagic 64-bit driver package. Note that these often require a specific initialization firmware that loads every time the device is plugged in.
Extract the contents of your downloaded ZIP archive to a distinct folder on your desktop (e.g., C:\Users\YourName\Desktop\EasyCap_Drivers ). Step 2: Manually Inject the Driver via Device Manager samuelcarreira/EasyCap-SM-USB-007-Windows-10-x64-drivers easycap-sm-usb-007-windows-10-x64-drivers
Before downloading anything, you must identify your specific chipset. How to Find Your Hardware ID Plug your EasyCap device into a USB port.
If you have a rebranded EasyCAP (e.g., Honestech VHS to DVD 5.0), their official site provides signed x64 drivers for the SM-USB-007. However, these are locked to specific software.
: Some third-party video capture software may offer better compatibility with the EasyCap SM-USB-007, even if official drivers are not available.
In some cases, users might need to consider alternative solutions if they cannot find compatible drivers. These could include: This driver is signed and works on Windows
Before installing, ensure your device matches the internal ID that this driver supports: Open (right-click the Start button). Find the unknown device (usually listed as "SM-USB 007"). Right-click it > Properties > Details tab.
: If the driver fails to install, verify your device's Hardware ID in Device Manager. On the Details tab, check if the ID matches the one supported by these drivers (typically related to the SMI chipset).
. These devices are notorious for driver compatibility issues because many use different internal chipsets (like Somagic, UTV007, or AMT600) despite sharing the same exterior casing. Driver Setup & Technical Overview
This comprehensive guide walks you through verifying your hardware ID, manually applying the 64-bit drivers, and configuring modern recording tools like OBS Studio . Part 1: Verify Your EasyCap Hardware ID Advanced Options ->
As of 2023-2025, no "official" EasyCAP driver is signed for Windows 10 x64. However, the community at OBSProject and VideoHelp created a based on the EM2860 reference driver.
The original EasyCAP drivers were released for Windows XP and Vista (32-bit). These drivers:
This is perhaps the most frequent obstacle. Windows 10, especially recent versions, requires kernel drivers to have a valid digital signature. The EasyCAP driver is not properly signed, which can prevent it from loading. To work around this, you can temporarily disable Driver Signature Enforcement. To do this, restart your computer. While it is booting, hold down the and select Restart from the power menu. Your PC will boot into the Advanced Startup Options menu. Navigate to Troubleshoot -> Advanced Options -> Startup Settings and click Restart . When your PC restarts, you will see a list of options. Press 7 or F7 to select Disable driver signature enforcement .