Your currently selected language is English.
Your currently selected location is the United States and your order will be billed in USD. The delivery methods, conditions of sale and delivery points will be updated when you change the country.
The primary role of version 02.10.00 is to facilitate a stable connection between the vehicle's OBD-II port and the VCDS software via a USB interface.
Installing VCDS USB driver version 02.10.00 requires a specific sequence. Do not plug your cable into the computer before installing the software. Step 1: Prepare Your System Disconnect the VCDS cable from your computer. Log into an account with full administrative privileges.
VCDS USB driver version 02.10.00 is a specialized tool required only for older, legacy VAG-COM interfaces. While its installation is straightforward, it is essential to use it only when necessary to avoid issues with modern VCDS setups. If you are experiencing connection issues, this driver update often bridges the gap between older hardware and modern Windows, ensuring full diagnostic functionality.
A critical distinction must be made regarding driver compatibility and counterfeit hardware. Official Ross-Tech Cable Clone / Counterfeit Cable Native support; stable operation. Often bricks the cheap FTDI chip inside the cable. Software Updates Free lifetime updates via Ross-Tech. Locked to a specific patched version of VCDS. Vehicle Safety High; safe for module flashing. High risk of data drops and module corruption.
Often seen in modern VCDS releases (e.g., version 22.x, 23.x, and beyond) and is generally stable on Windows 10 and 11.
Is your diagnostic cable a device or an aftermarket option?
: Unplug the USB cable, wait 5 seconds, and plug it back into a different USB port (preferably a USB 2.0 port instead of USB 3.0, as older cables prefer USB 2.0). 2. Windows Digital Signature Warning
Go to > Advanced options > Startup Settings > Restart .
For users who need to use third-party software alongside their Ross-Tech hardware, an experimental Virtual COM-Port driver is available. This driver emulates a serial COM port, enabling diagnostic applications that communicate exclusively via serial ports to work with Ross-Tech USB interfaces. However, for this driver, and it should only be used by those with advanced driver installation expertise.
Version 02.10.00 is officially signed. If you see this error, you likely have a cloned or counterfeit cable using an altered driver. You must uninstall the fake driver, reboot, and install genuine Ross-Tech software. 3. Power Management Dropouts
In bench tests, version achieves approximately 95% of the throughput of the latest FTDI drivers. However, its deterministic latency (reliable 2ms) actually outperforms newer drivers on single-core CPUs found in older laptops. For reading fault codes, live data (measuring blocks), and basic output tests, this driver is more than sufficient. For high-speed logging (e.g., turboback pressure at 100 samples/sec), you will want a newer driver and a genuine HEX-V2 interface.
The is an older driver version for Ross-Tech HEX-V2 and HEX-NET interfaces. It is typically bundled within the VCDS software installation and is not intended for standalone installation or use with third-party software.