Hp Psc 1350 Allinone Printer Driver For Windows 10 Upd _hot_ Jun 2026
If it fails, select "Search for updated drivers on Windows Update," which will open the Windows Update settings page. Click Check for updates .
| Issue | Solution | |-------|----------| | Printer not detected | Try a different USB port or cable. Restart Print Spooler service. | | Driver install fails | Run the installer in . | | No scanning option | Use Windows Fax and Scan or download HP Scan Extended (legacy version). | | Printer offline | Go to Printer Properties > Ports > Check “Enable bidirectional support”. |
Once refreshed, select (or Hewlett-Packard) from the left pane.
HP PSC 1350 All-in-One printer , Windows 10 typically does not require a manual driver download from HP’s website, as hp psc 1350 allinone printer driver for windows 10 upd
HP PSC 1350 All-in-One Go to product viewer dialog for this item.
The keyword phrase hints at what many miss: Windows Update itself holds legacy drivers if you know where to look.
How to Install HP PSC 1350 Drivers on Windows 10 The HP PSC 1350 is a legacy all-in-one printer, and while HP no longer provides a dedicated "Full Feature" software suite specifically for Windows 10, you can still get it running using built-in drivers or specific workarounds. 1. Use the Windows Built-in Driver (Recommended) If it fails, select "Search for updated drivers
HP PSC 1350 All-in-One printer can be used with Windows 10, though official full-feature software may no longer be updated since Windows 10 support formally ended on October 14, 2025. For modern systems, the most reliable way to maintain functionality is through the or the HP Smart app . Installation Methods for Windows 10
Visit the official HP Support Center and search for "Universal Print Driver".
You do not need to discard your reliable HP PSC 1350 All-in-One printer just because software architectures have evolved. By leveraging the Windows Update Catalog, utilizing manual port assignment, or installing the HP Universal Print Driver framework, you can successfully bypass legacy blocks and extend the operational life of your printer on Windows 10. Restart Print Spooler service
If your PC still has a parallel port (unlikely), the PSC 1350 works flawlessly in legacy mode without drivers. You can enable "Legacy Plug and Play" in BIOS.
98% for printing. This method uses the same print engine commands as the original PSC 1350 driver because the hardware is nearly identical to older Deskjet models.
A: You likely installed the wrong driver (e.g., HP LaserJet driver). Uninstall and use Deskjet 990c or HP UPD PCL 5.
: Allow Windows to download and install the driver automatically. Restart your computer if prompted. Method 2: Manual Installation via Device Manager
When you plug your HP PSC 1350 into a Windows 10 PC via USB, you might see one of three things:
