The board supports the latest PCI Express standards for workstation cards.
If you have the Small Form Factor (SFF) version of this board, you are limited to "Low-Profile" graphics cards. The Microtower (MT) gives you much more clearance for full-sized GPUs.
This guide provides the updated specifications, component compatibility, and upgrade paths for the HP E93839 motherboard as of early 2026. 1. Overview and Core Specifications
The motherboard is a versatile, albeit older, workhorse primarily found in HP’s business desktop lines like the Compaq 8200 Elite SFF and EliteDesk 800 series . Because "E93839" is a regulatory number used across several hardware generations, specifications vary depending on the specific "SSID" or chipset used in your model. Core Technical Specifications hp fxn1 e93839 motherboard specs updated
Based on the keyword string provided, you are referring to the , which corresponds to the ** motherboard used in the HP Z2 Tower G4 Workstation**.
Integrated Intel HD Graphics (dependent on CPU); supports discrete low-profile GPUs
It typically includes one PCIe x16 slot for dedicated graphics card upgrades, alongside PCIe x1 and legacy PCI slots for expansion cards like Wi-Fi adapters or sound cards. The board supports the latest PCI Express standards
The board provides basic expansion lanes for dedicated graphics cards and additional storage controllers. 1 x PCI Express x16 Gen 3.0 (for dedicated graphics cards) 1 x PCI Express x1 Gen 2.0
Navigating the specifications of proprietary OEM motherboards can be confusing. This updated breakdown clarifies the core specifications, hardware compatibility, and expansion possibilities for the HP FXN1 E93839 motherboard Core Specifications at a Glance
I can give you exact compatibility advice or tell you which power adapters you will need. Share public link Because "E93839" is a regulatory number used across
Note: While 10th Gen T-series processors exist for similar HP models (e.g., Brighton boards ), the standard E93839 G3 board is typically limited to 6th/7th Gen. 3. Memory (RAM) Specifications
The motherboard is powered by the . While some early forum posts and retail systems shipped with 2nd Generation Sandy Bridge CPUs (like the Pentium G850 or Core i5-2400), the motherboard's Q67 chipset is fully capable of supporting both 2nd and 3rd Generation (Ivy Bridge) Intel Core processors . Upgrading to a 3rd Gen chip can provide better performance and efficiency.
This board is designed for standard DDR3 modules but has limitations on total capacity. RAM Configuration 2x 240-pin DIMM Type: DDR3 Non-ECC, Unbuffered Speeds: 1066 MHz, 1333 MHz, 1600 MHz Max Capacity: 16GB total Storage Interfaces SATA: 4x SATA II (3.0 Gb/s) ports Note: This board usually lacks SATA III (6.0 Gb/s) 🔌 Expansion & I/O Ports