After a successful reset, the program will instruct you to turn the printer off. Turn off the printer using its power button, wait 10-15 seconds, and then turn it back on. The error message should be gone, and the printer should be ready for normal use.
You must open the SX230 case. Locate the square foam pad at the bottom right (under the capping station). You have two options:
: The power light and paper/ink error lights on the printer panel flash alternately. epson sx230 printer resetter adjustment program
Epson does not release these tools. The Adjustment Program for the SX230 is leaked . It was written in VB6 in 2008 and requires Windows 7 compatibility mode to run on Windows 11.
A pop-up warning will appear asking for confirmation. Click . Step 5: Finalize the Reset After a successful reset, the program will instruct
If you find the process too risky or technical, consider these options:
You will now see the current counter values. Check the boxes for "Main Pad Counter" and "Platen pad counter" . To see how full they are, click the Check button first. After confirmation, click the Initialize button. A warning message will appear reminding you to physically replace the pads. Click OK to proceed. The program will show a confirmation that the counters have been initialized. Click OK again. You must open the SX230 case
Using the resetter is not a permanent hardware fix. To avoid future service errors and physical damage:
A: Yes, the SX235W uses the same internal firmware and resetter. Simply select "SX235" in the model list if available.