The user navigates to the advanced menu layout and selects the "Waste ink pad counter" option under the maintenance subsection.
The Adjustment Program works by resetting this digital counter back to 0%, tricking the printer into thinking it has fresh, empty pads. Key Functions of the Utility
Consider installing an external waste ink tank (waste ink bottle) to avoid needing to replace the pads in the future. Troubleshooting: "Adjustment Program Not Working" If the software does not work, check these common issues:
To run the adjustment program successfully, the printer must be connected directly to a Windows computer using a physical USB cable. The software generally does not function properly over Wi-Fi or network connections. epson l3256 adjustment program work
If you encounter these, you may be able to fix it with the software, either yourself or with professional help.
Turn off your antivirus software to prevent it from deleting the executable file. Step 2: Launch the Program
Many antivirus programs flag adjustment tools as false positives because they interact directly with hardware registries. You may need to temporarily disable your antivirus software while running the tool. The user navigates to the advanced menu layout
Forces a heavy prime of the ink lines if the printer has sat idle.
Make sure your printer is turned and securely connected to your computer via USB.
The AdjProg.exe file is launched (often requiring administrative privileges on Windows). Turn off your antivirus software to prevent it
A commercial, user-friendly alternative. WIC Reset allows you to read waste ink counters, reset them, and run maintenance tasks for a fee. It is straightforward and less intimidating for novice users.
| Error Message | Cause | Solution | |---------------|-------|----------| | Communication error 0xEA | Printer not in Service Mode | Re-enter Service Mode as per Section 4.1 | | Counter value invalid | Corrupt EEPROM sector | Use EEPROM backup to restore; if none, initialize EEPROM | | Initial ink charge failed | Ink low or air in tubes | Manually purge tubes; run charge again | | Motor overload timeout | Paper jam or encoder strip dirty | Clean encoder strip; remove jam; reset gear train |