Click on the (or PDA) button in Odin. Browse your computer and select the twrp_3.0.2-1_sm-t560.tar file. It will appear in the AP slot. Do not change any other settings ; leave all checkboxes as they are.
The official Samsung flashing utility for PC.
Click on the button (or PDA button in older Odin versions). Browse for and select the twrp-3.0.2-1-sm-t560.tar file. twrp3021smt560tar full
Go to the "Options" tab in Odin and uncheck Auto Reboot . This prevents the tablet from overwriting TWRP with the stock recovery immediately after flashing. Click Start . 4. Initial Boot into TWRP Once Odin shows a green "PASS" message:
If you run into issues during setup, try these common troubleshooting fixes: Click on the (or PDA) button in Odin
If you succeed, you will see the TWRP home screen. If you see the stock Android recovery or the device boots normally, TWRP may have been overwritten by the stock recovery upon the first boot. This is a known issue with Samsung devices. If this happens, simply start again from Step 1, and ensure you are ready to hold the button combination as soon as the Odin flash finishes.
Safety notes and final tips
Swipe the slider at the bottom of the screen to "Allow Modifications". Troubleshooting Common Flashing Issues
: Power off the tablet, then hold Home + Volume Down + Power until a warning screen appears; press Volume Up to enter Download Mode. Flashing : Connect the tablet to your PC. Do not change any other settings ; leave
Wait for the progress bar to finish. A green logo will display in the upper-left corner of Odin once complete. The tablet will automatically reboot. Booting into TWRP 3.0.2-1
Step 1 — Prepare PC and drivers