Smart Pss Pc Nvr Setup 'link' Online

Now you must add your newly configured PC storage server into the main Smart PSS control panel. Launch the main software application. Enter your master login credentials. Click on Devices from the main menu console.

During installation, you will be asked to choose components. Check the box for SmartPSS . You can uncheck Storage Service unless you plan to turn your PC into a recording server.

Verify that your PC and NVR are connected to the same router or network switch.

Always download the software from official channels to ensure system stability and security. smart pss pc nvr setup

This is the critical step where your PC becomes the recorder.

A PC NVR is useless if you can’t check it from your phone.

Input your NVR administrator username (default is typically admin ). Now you must add your newly configured PC

If your PC and NVR are on the exact same local network, this is the quickest method.

Choose the components you wish to install. For standard operations, select (the Storage Service component is only required if you intend to use your PC as a backup recording server). Click Install and launch the application upon completion. Step 2: Initial Software Initialization

The current IP address or P2P Serial Number (SN) of the NVR. The NVR admin username (default is usually admin ). Click on Devices from the main menu console

The timeline at the bottom of the screen will fill with colored bars indicating recorded footage. Click anywhere along this timeline to watch the recorded video.

Click the icon at the top of Smart PSS to return to the main menu. Select Live View .

Select the local hard drive you wish to use for recordings and click .

To set up motion recording: