: Simplifies the process of turning a standard micro SD card into a bootable recovery tool loaded with a .img firmware file.
When over-the-air (OTA) updates are unavailable, this tool provides a way to manually flash a firmware image (.img) directly to the device.
Amlogic Burn Card Maker is a Windows-based software tool that allows users to create bootable SD cards, eMMC cards, or USB drives for Amlogic devices. The tool supports various Amlogic chipsets, including S905, S905X, S905Y, S901, and more. With Amlogic Burn Card Maker, you can flash your device with a custom firmware, install a new operating system, or restore your device to its factory settings.
Open Windows Disk Management and reassign a clean drive letter. Invalid file system format. amlogic burn card maker v203 download top
If the SD card method does not work, use the Amlogic USB Burning Tool v2.x to flash the .img file directly via a USB-to-USB cable 1.2.5.
Press and hold the Reset button using a toothpick, paperclip, or non-conductive tool.
Choose your microSD card from the dropdown menu. : Simplifies the process of turning a standard
In the dropdown menu, select the drive letter corresponding to your MicroSD card/USB.
The flashing process usually takes about 5 minutes. Do not disconnect the power until the device reboots into the setup screen.
Are you looking to or recover a completely bricked device ? The tool supports various Amlogic chipsets, including S905,
: You first download the tool and the correct .img firmware specifically for your device's chipset (like the S905 or S912). Creating the Burn Card :
: Use a high-quality micro-SD card formatted as FAT32 with a single partition.
Keep your firmware .img file in the root of your hard drive (e.g., C:\firmware.img ) to avoid errors caused by long file paths or special characters.