Place the upholstered knee pad onto the lower section of the frame (supported by cleats or pocket screws driven from underneath the platform into the side uprights). Step 6: Sanding and Finishing
Position the lower cross-support about 10 inches from the bottom of the frame. Secure it between the two side panels to prevent rocking. Step 3: Construct the Kneeler Base
Ensure your bottom feet extend far enough forward and backward (usually 10 to 12 inches total depth) so the kneeler does not tip over when you stand up.
Wood glue, sandpaper (120 and 220 grit), wood stain or paint diy prayer kneeler plans work
Using your circular saw, cut the 1" x 4" lumber into the required pieces for the frame:
Attach hinges to the shelf, allowing it to fold up when not in use:
Even if your first DIY attempt has slight alignment issues (e.g., the slope is off by 2 degrees), you will still have a functional liturgical object. And you will have learned skills for your next build—perhaps a matching prayer stool or a wall-mounted cross. Place the upholstered knee pad onto the lower
Most DIYers fail here. Trace your side panels. Measure 24” high on the back edge. At the front edge, measure 22.75” high. Draw a line connecting them. That line is your 8-degree slope. Cut it. Now your armrest will slant forward.
The big question is:
Before mounting the padded kneeler, finish the wooden structure. Step 3: Construct the Kneeler Base Ensure your
Pocket holes keep the screws hidden, preserving the clean look of the wood.
Mark a point 5 inches wide at the top of your 32" side panels. Mark a point 7.5 inches wide at the bottom.