Group your physical outside lines (analog CO lines or PRI channels) into specific bundles (e.g., Bundle 1 for local calls, Bundle 2 for long-distance). Navigate to .
Disclaimer: This guide is intended for administrators working with Siemens/Unify HiPath systems. Always backup system configurations before making changes.
Create a single terminal number (e.g., 5000 for Sales). Add member extensions to distribute incoming call volume evenly across personnel. 6. Backup, Maintenance, and Database Migration
: Integration with third-party applications is achieved through the HiPath CAP Management and TAPI drivers .
ADD-LCR:STRING=0,PREFIX=0,ROUTE=1,MINLEN=7,MAXLEN=11; siemens hipath 3800 programming manual exclusive
Based on user documentation, here are common feature access codes (may vary by system version):
| Specification | Detail | |---|---| | | IBM dedicated communications processor | | BHCA Value | 25,000 | | Traffic Capacity | 0.54 Erlang per port | | Maximum Users | Up to 1,000 (distributed across up to 32 locations) | | Standalone Capacity | Up to 500 workpoints | | Weight | 18 kg | | Model Versions | V8, V9 (latest known) |
Locate the slot number matching your SLC16 or SLU8 card. Assign an extension number, name display, and Class of Service (CoS).
The HiPath 3800 is a flexible system that adapts to your physical environment, supporting both standalone (floor-standing) and 19-inch rack-mounted installations. Depending on requirements, it can be deployed as: Group your physical outside lines (analog CO lines
Note: Default passwords vary; contact your SEN Sales Team for service-level access if required. 3. Core Programming Procedures Once connected, you can configure system elements. A. Configuring Extensions (Station View)
Add the extension numbers of the team members to the group list. System-Wide Speed Dials
: System-level programming is conducted via HiPath Manager E (or Manager C for basic versions), which allows for the configuration of trunks, extensions, and user permissions.
The system logs hardware or software issues, which can be viewed in the Service Documentation. 5. End-of-Life and Support Always backup system configurations before making changes
Always perform a "Save to File" in Manager E before making changes.
Assign the respective COS profile to each extension under the individual station setup screen. Step 4: Configuring Call Distribution and Hunt Groups
When troubleshooting hardware failure or trunk dropouts, reviewing the error log is critical: