Jungheinrich Etv 216 - Error Codes

For accurate diagnosis, you need software. The Jungheinrich proprietary tool (Service Lab) is expensive. Third-party options like or Linde/Jungheinrich CAN adapters with PCAN-View can read codes.

Display and operational logic errors. 🛑 Common Jungheinrich ETV 216 Error Codes 1. Drive and Brake System Faults (100-Series) Error 101 / 102 (Drive Motor Temperature) Meaning: The drive motor is overheating.

| Fuse location | Function | |---------------|----------| | F1 (under seat / right panel) | Main traction (80A) | | F2 | Hydraulic pump (100A) | | F3 | Logic / Controller (10A) | | F4 | Lights & horn (15A) |

Check the steering potentiometer gears. Ensure the encoder connections are secure. Error 315 (Steering Motor Overcurrent) jungheinrich etv 216 error codes

The is a workhorse of the warehousing world. This reach truck is known for its narrow-aisle agility and lift height, but like any complex machine with CAN-bus systems and AC traction motors, it will occasionally flash a fault code.

| Error Code | Description | Possible Cause | Recommended Action | | :--- | :--- | :--- | :--- | | | Accelerator pedal fault | The pedal is not returning to its zero position, which is a safety feature. | The pedal may need to be calibrated or replaced entirely. | | 065 | Brake release error | The electric brake is not engaging or disengaging properly. | Check the brake coil and its wiring for damage or loose connections. | | 107 | General contactor fault | A generic fault indicating a problem with a contactor in the drive, pump, or master control circuit. | Check all main contactors (DRIVE, PUMP, MFC). Measure voltage across the contactor coil and contacts to identify the faulty unit. |

If a code appears, follow these steps to narrow down the problem: For accurate diagnosis, you need software

Failed steering encoder or loose mechanical linkage between the steering motor and sensor.

“Disconnecting the battery for 10 seconds clears all codes.”

If you are seeing complex codes or the truck isn't responding despite no clear error: Display and operational logic errors

Cause: Both pedals are being pressed at once.

The structure of a typical error code is: