The brand code you entered may only offer partial compatibility. Repeat the programming process using a different code from the list.
Directly controls the master volume of the AV receiver, regardless of the active remote mode. MUTING: Instantly silences the audio.
Onkyo RC-799M Remote Control Manual: Setup, Codes, and Troubleshooting
Approximately 16 feet (5 meters) at a 30-degree angle 2. Onkyo RC-799M Button Layout Explained onkyo rc-799m remote manual
If the code is accepted, the indicator light will flash twice. If it flashes once rapidly or not at all, the code was invalid, and you must restart from Step 2.
Note: Replace batteries if the remote's operational range decreases or if the receiver stops responding consistently. Always replace both batteries at the same time. 3. Programming the RC-799M to Control Other Components
A: Usually, no. The dedicated RC-799M is designed strictly for Onkyo receivers. You should use a separate universal remote for other devices. Some third-party sellers offer a "multi-brand" version, but a standard RC-799M will not control a TV. The brand code you entered may only offer
If your RC-799M is physically broken (dropped, cracked board), do not pay $80 for a used one on eBay. Instead, buy a universal remote like the (discontinued but available used) or a SofaBaton U2 .
Aim the remote at your device and press the Power button. If the device responds, the programming was successful. If it does not respond, repeat the steps using an alternative code for that brand. Troubleshooting Common Issues The Remote Is Not Operating the Receiver
The RC-799M features a logical layout designed for tactile feedback and quick navigation. AliExpress Basic Manual - Onkyo MUTING: Instantly silences the audio
You need a 4-digit or 5-digit code for your device brand. (See the code table in Part 4 below).
: Shows current input/output information on the receiver's front panel or TV screen. 🛠️ Troubleshooting & Reset