Asprogrammer 2.1.0.13 ((install)) Jun 2026

: The chip must be erased before a new .bin or .rom file is "Programmed".

| Feature | Asprogrammer 2.1.0.13 | NeoProgrammer | flashrom | CH341A Programmer (old v1.x) | |---------|------------------------|---------------|----------|-------------------------------| | GUI | Yes | Yes (more polished) | No (CLI) | Yes (very basic) | | Chip DB size | ~1000 | ~1500 | ~800 | ~200 | | I2C support | Full | Full | Limited | None | | Scriptable | No | No | Yes | No | | Speed (MB/s) | ~0.05 | ~0.05 | ~0.07 | ~0.03 | | Active development | Stalled (2021) | Active (2024) | Active | Dead | | Open source | Yes (Delphi) | Yes (C++ Builder) | Yes (C) | No (closed) |

Extensive compatibility with I2C, SPI, and MicroWire protocols. Asprogrammer 2.1.0.13

: SPI NOR Flash (25xx), I2C EEPROM (24xx), and MicroWire (93xx).

: Includes support for a wider array of 24, 25, and 93 series chips compared to older versions. : The chip must be erased before a new

The software boasts an extensive, editable chip database ( chiplist.xml ), allowing for excellent expandability. Its default library includes support for a wide variety of memory chips and microcontrollers:

: Asprogrammer is not the most feature-rich (NeoProgrammer wins) nor the fastest ( flashrom with --fast ). Its strength is simplicity and low resource use . : Includes support for a wider array of

[Connect Clip] ➔ [Detect/Select IC] ➔ [Unprotect] ➔ [Erase] ➔ [Blank Check] ➔ [Open Bin & Write] ➔ [Verify] 1. Hardware Preparation AsProgrammer Version 2.1.0.13