Gateman+v20+manual __hot__
: Open the battery cover on the inside unit and press the [R] button once (you will hear a beep).
Close the door and align the strike plate on the door frame with the lock bolt.
Touch all cards/tags you wish to register against the card reader one by one. Press the button again to complete registration. Automatic/Manual Locking : Open the battery cover. Locate the toggle switch labeled [A/M] .
A factory reset will erase all user codes and cards. The master password may also return to a default value.
Plug the wire harness from the front body securely into the back of the interior main body. gateman+v20+manual
: Touch the keypad palm to turn on the backlight →right arrow →right arrow Touch the keypad again or press the [*] key.
The Comprehensive Gateman V20 Manual & User Guide: Security, Installation, and Troubleshooting
To prevent onlookers from guessing your password by watching your finger movements or looking at fingerprint smudges, the Gateman V20 Go to product viewer dialog for this item. features a dummy code function.
Firmly press the positive and negative terminals of the 9V battery against these two metal contacts. : Open the battery cover on the inside
If you are looking for specific operational "papers" or instructions, here are the most critical sections typically found in the manual: Installation Template
The lock will automatically throw the bolt 2 seconds after the door closes.
will play a distinct warning melody (often the tune of "To Elise" ) after unlocking. It will also flash a red light on the keypad. Replace all 4 AA alkaline batteries immediately. Do not mix old and new batteries.
To configure your lock, you must first access the registration button located inside the battery compartment on the interior body of the lock. Press the button again to complete registration
Align the striker on the door frame with the main body deadbolt.
Contact point for scanning RFID cards and key tags.
Slide the switch to for Automatic locking or M for Manual locking. Advanced Features and Security Settings Fake PIN Code Feature (Scramble Code)
| Category | Specification | | :--- | :--- | | | 25.5(D) x 68(W) x 170(H) mm | | Dimensions (Interior) | 36(D) x 85(W) x 158(H) mm | | Lock Type | Digital (RFID Card & PIN Code) | | User Capacity | 20 RFID Cards | | PIN Code Length | 4-12 digits | | Power Source | 4 x AA (1.5V) Alkaline Batteries | | Battery Life | Approx. 12 months (based on 10 uses/day) | | Low Battery Warning | Yes (audible alert) | | Emergency Power | 9V battery terminal (external) | | Material (Exterior) | Zinc Die-Cast | | Material (Interior) | Fiber Glass/ABS | | Operating Temperature | -15°C to +60°C | | Fire Alarm Trigger | ~60°C - 70°C |
