Locate the device, likely under "Other Devices" or "Ports (COM & LPT)" with a yellow warning icon. Right-click it and select .
Once connected, Windows should automatically install the FTDI driver. In Device Manager, you should see the cutter appear under "Ports (COM & LPT)" as a COM port (usually COM3 or COM4). Right-click this COM port, go to Properties > Port Settings, and set to match the cutter.
| Software | Portable Option | Best for | | :--- | :--- | :--- | | | Yes (USB version) | Professional vinyl cutting | | Sure Cuts A Lot (SCAL) | Yes (installs to USB) | Hobbyists & fonts | | ArtCut (Old version) | No (requires install) | Legacy plotter control | creation+pcut+ct+1200+driver+download+portable
Store your vector design software (like a portable version of Inkscape) directly on an external drive.
: If it is not recognized, you may need an FTDI driver or the Arduino development kit , as some units install as an Arduino communication port. 2. Configure the COM Port Locate the device, likely under "Other Devices" or
Once the driver is mapped, your computer will assign a virtual COM port number. Modern operating systems often assign high port digits (such as COM11 or COM14), which legacy vinyl cutting software cannot read.
: Right-click > Properties > Port Settings > Advanced. Change the COM Port Number to COM1, COM2, COM3, or COM4 . In Device Manager, you should see the cutter
Select the COM port identified in Device Manager (e.g., COM2) 1.2.5 . Baud Rate: Set to 9600 1.2.5. Handshake/Flow Control: Set to Hardware 1.2.5. 5. Troubleshooting: "Cutter Not Found" If the driver is installed but the plotter does not react:
The plugin for your software (e.g., SignCut). Creation PCut CT-1200 Driver Download Guide
If you cannot install software on a work computer, follow this for the creation+pcut+ct+1200 .
