: Approximately 1.5 years based on 10 uses per day.
If the "Replace Battery" alarm sounds, change all 4 batteries immediately to prevent lock failure. Keep the manual safe for future reference.
Secure the exterior unit tightly against the outside of the door. 3. Fixing the Interior Main Bracket Position the mounting bracket on the inside of the door. Thread the connection cable through the bracket slot. Screw the bracket firmly into the door. 4. Connecting and Mounting the Interior Body
Pass the cable through the door and attach the front body securely. gateman v20 manual
Touch the exterior keypad screen with your palm, or press the [Open/Close] button on the inside unit to lock the door. Fake PIN Code Feature (Anti-Peeping)
Sounds an alarm if the lock is forced or tampered with. 2. Initial Setup and Registration
Note: The Master PIN is used to register other users. Do not forget this code. : Approximately 1
Plug the cable connector securely into the back of the interior body. Organize the excess wire to avoid pinching.
PIN Code (4–12 digits) or Registered RFID Card Key. Power Supply: 6V DC (4 AA alkaline batteries). Emergency Power: 9V block battery (external contacts).
The Gateman V20 manual covers a range of key features and settings that users need to understand to get the most out of their gate operator. Some of these include: Secure the exterior unit tightly against the outside
Secure the metal plate to the inside of the door using the provided wood or metal screws.
The Gateman V20 offers a sleek, modern user interface. Here’s how to use it for everyday access: