Launch your preferred web browser and enter the router’s IP address: . Some D-Link routers also support http://dlinkrouter.local as an alternative access method.

Disclaimer: This guide is for informational purposes. Always refer to the official documentation provided by D-Link for your specific hardware revision and region.

D-Link DWR-M920 Firmware Update: Comprehensive Step-by-Step Guide (2026)

Before downloading any files, you must identify your router's hardware version (e.g., A1 or A2). This is usually found on a sticker on the bottom of the device. Installing firmware meant for a different hardware revision can permanently damage (brick) your router.

Inside the administration panel, navigate to the , System Upgrade , or Tools > Firmware section. Click on the Browse or Choose File button.

Updating your firmware is just one part of maintaining a secure network. After completing the DWR-M920 firmware update, consider implementing these security measures:

The process involves three main phases: preparation, downloading the correct firmware, and the installation itself.

Fixes bugs related to SIM card connectivity and signal drops.

Ensure your router and computer are plugged into a reliable power source. A power failure during the update process can permanently damage the router.

Click the , Apply , or Update button to start the process.

Before executing a manual firmware update, you must take essential precautions to avoid bricking your router. DWR-M920 - D-Link

Ensure your computer is connected to the router using an Ethernet cable. Power on the router and wait for the LEDs to stabilize.

Manufacturers occasionally introduce new software capabilities, improved user interfaces, or better quality-of-service (QoS) controls through updates. Critical Pre-Update Checklist

Select your specific hardware version from the dropdown menu.

D-link Dwr-m920 Firmware Update Official