Scangle’s macOS support is thinner than Windows. You will likely need a generic CUPS driver.

Open Terminal, navigate to the extracted folder, and run the installation script using root privileges: sudo ./install.sh Use code with caution.

: Fully compatible with ESC/POS and OPOS command sets. Key Specifications Specification Print Method Direct Thermal Line Printing Print Speed Max 300 mm/s Resolution 203 DPI (8 dots/mm) Paper Width Supports 80mm and 58mm rolls Interface USB + Serial + LAN (standard); optional WiFi or Bluetooth Auto-Cutter Lifetime of 1.5 million to 2 million cuts Installation Guide

The driver needs a "Control" command.

The Scangle SGT-88IV features an RJ11 port to trigger a 24V cash drawer automatically when a receipt prints.

If the setup wizard fails, use this manual method:

The Scangle SGT-88IV is a high-speed, reliable 80mm thermal receipt printer widely used in retail, hospitality, and point-of-sale (POS) systems. To ensure seamless communication between your computer and the printer, installing the correct driver is essential.

: If your hardware was acquired through regional channels, use the Scangle India Download Center to pull specific SGT-88IV setup files, product brochures, and updated software utilities directly.

Ensure you have the correct data cable (typically a USB Type-A to Type-B cable) ready to connect to your computer. Step 2: Where to Download the Driver

2. Step-by-Step Installation Guide for Windows (11, 10, 8, 7)

Once the installation finishes, it is recommended to restart your computer. 4. Setting Up Network (LAN) Connectivity If you are using the LAN/Ethernet version of the , follow these steps to configure it: