Operating system corruption prevents the partition verification process from finishing.
Unzip the downloaded firmware and flash tool to your desktop.
Follow this systematic approach to flash the .pac file safely and revive your phone:
SPD Upgrade Tool or Spreadtrum (SPD) Flash Tool. Drivers: Spreadtrum/SPD USB Drivers installed on your PC.
The flash file, or firmware, is the operating system of your phone. The specific "AE9120" or "S160" flash file contains the necessary partition images (scatter file, boot, system, recovery, etc.) needed to re-flash the EMMC/UFS storage of the device. lava benco v90 ae9120 flash file s160 hang logo new
What (if any) you see in your flashing tool Which tool version you are currently running Whether your phone can still boot into Recovery Mode
It sounds like you’re dealing with a that’s stuck on the logo after flashing, and you’re looking for a working flash file (firmware) to fix the “hang on logo” issue.
Turn off the Lava Benco V90 completely. In the SP Flash Tool, click the "Download" button. Now, connect the switched-off phone to the PC via USB.
To ensure you’re working on the right device, verify these specs: Drivers: Spreadtrum/SPD USB Drivers installed on your PC
Disconnect the phone and turn it on. The first boot may take 5–10 minutes. Troubleshooting: Hang on Logo Persistence
It begins with a user reaching for their , expecting to see their home screen. Instead, they are met with a stubborn, glowing logo that refuses to move. This is the "Hang Logo" —a state where the phone’s software is corrupted, stuck in a boot loop, or completely unresponsive (dead boot).
: After completion, the device should automatically restart and begin the initial Android setup.
Note: Flashing firmware carries a risk of voiding your warranty or damaging the device if done incorrectly. Proceed at your own risk. What (if any) you see in your flashing
After successfully flashing the , follow these best practices:
A , "Success" , or "Write OK" message will appear on the tool screen once all blocks have been written. Unplug the USB cable safely from your phone.
: Dedicated Spreadtrum/Unisoc platform drivers are necessary for your Windows operating system to identify the hardware interface. Step-by-Step Flashing Tutorial
Release the buttons once the computer emits a connection sound, indicating that the device has successfully entered . Step 4: Begin the Flashing Process