Download __top__ Driver Cutting Plotter Jinka 1351 Link | 2026 Release |

Ultimate Guide: Download and Install Jinka 1351 Cutting Plotter Drivers

With the driver installed, you must align your software settings with your Windows hardware configurations. Select Jinka or Standard Vinyl Cutter .

Right-click the setup file (e.g., CDM21236_Setup.exe for FTDI or PL2303_Prolific_DriverInstaller.exe ) and select . Follow the on-screen prompts and click Finish . Step 3: Connect and Verify Hardware Jinka 1351 into a USB 2.0 port (ideally on the back of your PC). Turn the cutting plotter ON . Right-click the Windows Start Menu and open Device Manager . Expand the Ports (COM & LPT) section. download driver cutting plotter jinka 1351 link

Ensure the COM port number in your cutting software (like Artcut, SignMaster, or Anycut) matches the one assigned by Windows. Connect Hardware:

Once the file is downloaded (usually a .zip or .rar archive), follow this procedure: Ultimate Guide: Download and Install Jinka 1351 Cutting

The Jinka 1351 usually relies on a to bridge the connection between the USB port on your computer and the serial input on the plotter.

Try a different USB port, preferably on the back of the PC. Follow the on-screen prompts and click Finish

Reinstall the CH340 driver and restart your PC.

Before downloading any files, you must know which communication chip your Jinka 1351 uses. Jinka plotters generally feature one of two standard USB-to-Serial chips. Installing the wrong driver will prevent your software from sending cut data to the plotter.

If your plotter is still not cutting, check these common issues:

The is a highly popular entry-level cutting plotter designed to handle larger vinyl formats up to 135cm wide. To make the machine communicate properly with your computer, downloading and installing the correct driver is an absolute necessity. 🔌 Official Driver Download Links