Sinotimer Tm-630s Manual !!top!!

The timer is on "AUTO" but the connected device does not turn on.

Forcibly turns the output power OFF immediately, ignoring all programs. AUTO Mode: The timer follows your programmed schedule.

Repeat the day, hour, minute, and second selections for the shutdown time. To set more schedules, press to move to 2 ON , 2 OFF , etc. Press the Clock button to save and exit. Step 3: Select the Operating Mode sinotimer tm-630s manual

Press to select the day combination (e.g., individual days, weekdays only, weekends only, or every day). Press H+ and M+ to set the desired start hour and minute. Press S+ if you need precise second-level triggering. Press P again. The screen will display 1 OFF .

The is a high-capacity, 7-day programmable digital timer designed for heavy electrical loads like streetlights, water heaters, and air conditioners. It is distinct for its 1-second minimum interval and 30A load capacity , making it more robust than standard household timers. Key Specifications Load Capacity: Up to 30A (approx. 5000 Watts). Programming: 28 ON/OFF settings per day. Timing Range: 1 second to 168 hours. The timer is on "AUTO" but the connected

to unlock the panel (a small "a" or lock icon will disappear). Set Current Time Clock button while pressing (Hour), and (Minute) to match the current time. Program ON/OFF Schedules : "1 ON" appears. Set the start time using D+, H+, and M+. again: "1 OFF" appears. Set the stop time. (Second) if you need a specific second-interval duration. to save and exit. Manual Override to toggle between (constant power), (no power), or (follows your programs). Wiring Overview sinotimer-tm-630a-operating-manual.pdf - pic-control

A: The TM-630S includes a manual override function. Press the MANUAL (often a red) button to cycle between ON , OFF , and AUTO modes. Selecting ON will keep the load powered regardless of the programmed schedule. Repeat the day, hour, minute, and second selections

Hold the Clock button and press the D+ (Day) button until the correct day of the week appears.

For further details, you can refer to the TM630S-2 User Manual on Manuals+ or view a digital copy on Scribd . sinotimer-tm-630a-operating-manual.pdf - pic-control

Run the live/line wire from your main power source to Terminal 1 . Run the neutral wire to Terminal 2 . This powers the internal clock of the timer.