Understanding the hardware limits ensures accurate measurements and user safety. The 22-805 is a 3.5-digit digital multimeter featuring an easy-to-read liquid crystal display (LCD) and a 24-position rotary selector switch. Key Specifications 200mV, 2V, 20V, 200V, 1000V AC Voltage Ranges: 200V, 750V DC Current Ranges: 200µA, 2mA, 20mA, 200mA, 10A Resistance Ranges: 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ
| Problem | Probable Cause | Solution (from manual) | | :--- | :--- | :--- | | No display, no segments | Dead 9V battery | Replace battery. Check battery snap connection. | | Flashing "BAT" symbol | Low internal battery | Replace battery (9V). Reading may be 10-20% off. | | Reads "1" on all ranges | Overload condition, or test lead not fully seated | Check V/Ω and COM jacks. Turn dial to OFF then on. | | No continuity beep | Beep disabled, or leads damaged | Check dial is on buzzer symbol. Short leads – if no beep, replace leads. | | Blows fuse on 200mA range | Measured >200mA | Replace with 200mA/250V fast-blow. Do not use slow-blow. | | AC voltage reading unstable | Dirty dial contacts | Rotate dial back and forth 10-15 times. Clean with DeoxIT. |
The manual reminds you that the battery is . A low battery indicator will appear when it's time for a replacement.
Automatic polarity indication (minus sign appears for negative readings). Sampling Rate: Approximately 2 to 3 times per second. radio shack 24 range digital multimeter 22-805 manual
The manual for the RadioShack 24 Range Digital Multimeter 22-805 provides detailed information on how to use the device safely and effectively. Here are some key points from the manual:
If you encounter any issues with your multimeter, refer to the troubleshooting guide below:
The "24 range" refers to the combination of positions on the rotary dial—voltages (AC/DC), currents (AC/DC), resistances, and special functions like continuity and battery testing. Check battery snap connection
Turn the rotary switch to the Ω section. Choose a range higher than your expected resistance.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
An overrange indicator ("1") means the resistance is higher than the selected range; turn the dial to the next highest setting. 3. Testing Diodes and Continuity | | Reads "1" on all ranges |
RadioShack supplied two programs to log and display data:
: Includes internal fuses for circuit protection; always check the 20A and milliamp fuses if the meter fails to measure current.
The RadioShack 22‑805 offers a user‑friendly design and an accessible PC interface. Whether you're testing household wiring, diagnosing a vintage arcade monitor, or logging solar panel data, this versatile meter remains a capable tool—if you know how to wield it properly.