Kulkarni brought grace and quiet strength to her character, serving as the emotional anchor of the film.
Downloading or streaming movies from it is illegal in India (under the Cinematograph Act and Copyright Act). It also exposes you to:
Mitwaa remains a quintessential Marathi romantic movie that redefined the genre in 2015. With its engaging plot, intense performances, and memorable music, it is a testament to the growth of regional cinema. Whether you find it through legal platforms or search for it as "Filmyzilla Marathi Movie Mitwaa", it is a must-watch for fans of romantic dramas. Watch Official Trailer: Mitwaa on YouTube Read User Reviews: Mitwaa (2015) on IMDb If you'd like, I can: Filmyzilla Marathi Movie Mitwaa
Marathi cinema has a global audience. Viewers living outside of India often face strict geo-restrictions on legitimate streaming platforms. This lack of official international distribution inadvertently drives international fans toward alternative search queries. 3. The Permanence of Internet Search Habits
user wants a long article about "Filmyzilla Marathi Movie Mitwaa". I need to gather information on Filmyzilla as a piracy website, the Marathi movie "Mitwaa" (likely "Mitwaa" or similar), and the legal and ethical aspects of piracy. I'll search for these terms. search results for "Filmyzilla Marathi movie Mitwaa" show a Wikipedia page for "Mitwaa" and other relevant links. I'll open the Wikipedia page for more details.'ll open more of the Wikipedia page to get the full plot. I need to get information about Filmyzilla. I'll open result 2 from search 1.'ll also open result 0 from search 4 for legal information.'ll also open result 2 from search 5 for success article. I need to find information about Filmyzilla's impact on Marathi cinema. I'll search.'ll also search for "Mitwaa box office".'ll also search for "Filmyzilla alternatives". I have enough information to write the article. I'll structure it with an introduction, sections on Mitwaa, Filmyzilla, the risks of piracy, legal alternatives, and a conclusion. I'll cite sources appropriately. popular Marathi romantic film Mitwaa , a celebrated box-office hit from 2015, is unfortunately being offered for illegal download on the notorious piracy website Filmyzilla. This article provides a comprehensive look at the Mitwaa movie, the dangerous operations of Filmyzilla, and the critical importance of choosing legal platforms to support the film industry. Kulkarni brought grace and quiet strength to her
Note: As of the latest industry updates, specific production details for a film titled "Mitwaa" have varied. If we assume a standard Marathi romantic drama context (as "Mitwaa" implies "friend/lover" in several Indian languages), the film likely revolves around complex human relationships.
The story progresses as Shivam falls deeply in love with Nandini, breaking his own rules regarding romance. However, Nandini carries a mysterious past that complicates their future. The ensuing emotional conflict forms the crux of the movie, balancing heartbreaking moments with uplifting realisations about what it truly means to be a soulmate ( Mitwaa ). Why 'Mitwaa' Remains a Fan Favorite
To watch Mitwaa in high definition with official audio and subtitles, look for the title on the following authorized platforms:
The soundtrack, composed by Amitraj, Nilesh Moharir, and Pankaj Padghan, became an instant phenomenon. Tracks like "Mitwaa" and "Tu Hi Re" remain romantic anthems today. Decoding the Search: "Filmyzilla Marathi Movie Mitwaa"
Despite this tragedy, Nandini and Shivam eventually marry and start a family. The film’s emotional conclusion shows Nandini dealing with her past in a different way, cementing its status as a touching story about love, loss, and acceptance.
akopalypse.net
rTorrent and configuration
Documentation on rtorrent is scarce and spread all
over the interwebs. Some options are self-explanatory, some are tricky,
and for some features there is not a hint on the man page.
This config lets you
· deal with seperate trackers
· keep the .torrent files in respective directories
· watch these directories for new torrents
· prefer encrypted connections
Probably there is no point in encrypted traffic, as it uses RC4 as
encryption algorithm, which is broken for years.
The numbers in like
schedule = tied_directory,5,15,start_tied=
mean task done for the first time 5 seconds after starting, then
every 15 seconds.
Basics
Control start / stopped state
^s – Start download item. Runs hash first unless already done.
^d – Stop an active download item, or remove a stopped one.
^k – Stop item and close all files, also set 'ignore commands' flag.
Global throttling
a|s|d – Increase the upload throttle by 1/5/50 KiB.
z|x|c – Decrease the upload throttle by 1/5/50 KiB.
A|S|D – Increase the download throttle by 1/5/50 KiB.
Z|X|C – Decrease the download throttle by 1/5/50 KiB.
Other general keys
‹up›|‹down› – Select an item.
‹left› – Go back to the previous screen.
^o – Set new download directory on a closed item.
^x – Open a prompt for rTorrent commands.
^q – Exit rTorrent (press twice to skip 'stop' tracker announces).
Errors & Warnings
A tracker returns a HTTP 5xx status page, or a similar HTML
response
Tracker: [Could not parse bencoded data]
When trying to load corrupt metafiles
Could not create download, the input is not a valid torrent
Data of an item is changed or removed, after it is marked as
complete;
recover by pressing Ctrl+kCtrl+eCtrl+r, then possibly Ctrl+s to re-download.
Download registered as completed, but hash check returned unfinished chunks.
Flow control
If you access rtorrent on another machine by screen, there are some
caveats with flow control. The remote terminal and rtorrent may use same
commands.
For rtorrent, Ctrl+s starts a torrent, and
Ctrl+q quits the application.
For the remote terminal, Ctrl+s is often used for terminal
control to stop screen output while Ctrl+q is used to start
it, so Ctrl+s instead of starting a torrent pauses flow,
therefore the session looks frozen.
You can check with
$ stty -a
To remove the mappings, change the terminal characteristics to
undefine the aforementioned special characters (i.e. stop and
start):
# stty stop undef
# stty start undef
Toggle off:
Ctrl+a Ctrl+f
should fix that for the moment.
To remove these mappings automatically at startup you may add the two
preceding commands to your e.g. ~/.bashrc file.
Scrolling through a huge amount of torrents is tedious, and one can
only scroll from one to the other without the ability to skip pages or
skip to the next first letter like jump to the next torrent
beginning with an H. But torrents can be filtered:
AltGr+End
opens the filter> prompt, and bar stre lists all
torrents containing Barbra Streisand in its name. Search is
case-insensitive. You can filter for regular expressions also, but using
RE may put some heavy load on the machine.
A new empty filtering ends the filtering.
Disable SSL verification
Usually you want a secured connection to the tracker to avoid MITM
attacks or your provider or other third party snooping your traffic. But
some trackers mess up their SSL renewal process from time to time. If
you consider your ratio more valueable than encrypted traffic, you might
add
network.http.ssl_verify_peer.set=0
to your config. Remember to comment it out if not needed anymore and
consider to reset your passkey. Furthermore, certificate checking can be
enabled or disabled for all trackers, not seperately for each
tracker.
A configuration template
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed.
# Uncomment the options you wish to enable.
#
# .rtorrent.rc for /path/to/data
pieces.sync.always_safe = yes
# Maximum and minimum number of peers to connect to per torrent.
# Many simultaneous up/ downloads and my old access point freaks out.
min_peers = 1
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 1
max_peers_seed = 40
# Maximum number of simultanious uploads per torrent.
max_uploads = 20
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0
# disable SSL verification. Do not uncomment unless you know what you're doing.
#network.http.ssl_verify_peer.set=0
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = ~/rtorrentsession/
# Periodically save session data
schedule = session_save,500,120,session_save=
# Watch a directory for new torrents, save to corresponding folders and
# stop those that have been deleted.
schedule = watch_directory_1,30,90,"load.start=/path/to/data/abc/*.torrent,d.set_directory=/path/to/data/ABC/"
schedule = watch_directory_2,30,90,"load.start=/path/to/data/def/*.torrent,d.set_directory=/path/to/data/DEF/"
schedule = watch_directory_3,30,90,"load.start=/path/to/data/ghi/*.torrent,d.set_directory=/path/to/data/GHI/"
schedule = watch_directory_4,30,90,"load.start=/path/to/data/jkl/*.torrent,d.set_directory=/path/to/data/JKL/"
schedule = watch_directory_5,30,90,"load.start=/path/to/data/mno/*.torrent,d.set_directory=/path/to/data/MNO/"
schedule = watch_directory_6,30,90,"load.start=/path/to/data/pqr/*.torrent,d.set_directory=/path/to/data/PQR/"
# Restart torrents that have been copied back…
schedule = tied_directory,5,15,start_tied=
#… and stop those that have been deleted
schedule = untied_directory,5,15,close_untied=
# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=50G
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
# ip = 91.121.112.71
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 40000-59999
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry
#,prefer_plaintext
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
# Sort the main view by ratio
view.sort_current = main,greater=d.get_ratio=
view.sort_new = main,less=d.get_ratio=
view.sort = main
# Sort the seeding view by the upload rate and only show torrents with peers
view.sort_current = seeding,greater=d.get_up_rate=
view.filter = seeding,"and=d.get_complete=,d.get_peers_connected="
view.sort_new = seeding,less=d.get_up_rate=
view.sort = seeding
# Sort the leeching view by name
view.sort_current = leeching,greater=d.get_name=
view.sort_new = leeching,greater=d.get_name=
view.sort = leeching
# Filter the active view by connected peers
view.sort_current = active,less=d.get_name=
view.sort_new = leeching,less=d.get_name=
view.filter = active,d.get_peers_connected=
view.sort = active
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 64
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
Documentation on rtorrent is scarce and spread all
over the interwebs. Some options are self-explanatory, some are tricky,
and for some features there is not a hint on the man page.
This config lets you
· deal with seperate trackers
· keep the .torrent files in respective directories
· watch these directories for new torrents
· prefer encrypted connections
Probably there is no point in encrypted traffic, as it uses RC4 as
encryption algorithm, which is broken for years.
The numbers in like
schedule = tied_directory,5,15,start_tied=
mean task done for the first time 5 seconds after starting, then
every 15 seconds.
Basics
Control start / stopped state
^s – Start download item. Runs hash first unless already done.
^d – Stop an active download item, or remove a stopped one.
^k – Stop item and close all files, also set 'ignore commands' flag.
Global throttling
a|s|d – Increase the upload throttle by 1/5/50 KiB.
z|x|c – Decrease the upload throttle by 1/5/50 KiB.
A|S|D – Increase the download throttle by 1/5/50 KiB.
Z|X|C – Decrease the download throttle by 1/5/50 KiB.
Other general keys
‹up›|‹down› – Select an item.
‹left› – Go back to the previous screen.
^o – Set new download directory on a closed item.
^x – Open a prompt for rTorrent commands.
^q – Exit rTorrent (press twice to skip 'stop' tracker announces).
Errors & Warnings
A tracker returns a HTTP 5xx status page, or a similar HTML
response
Tracker: [Could not parse bencoded data]
When trying to load corrupt metafiles
Could not create download, the input is not a valid torrent
Data of an item is changed or removed, after it is marked as
complete;
recover by pressing Ctrl+kCtrl+eCtrl+r, then possibly Ctrl+s to re-download.
Download registered as completed, but hash check returned unfinished chunks.
Flow control
If you access rtorrent on another machine by screen, there are some
caveats with flow control. The remote terminal and rtorrent may use same
commands.
For rtorrent, Ctrl+s starts a torrent, and
Ctrl+q quits the application.
For the remote terminal, Ctrl+s is often used for terminal
control to stop screen output while Ctrl+q is used to start
it, so Ctrl+s instead of starting a torrent pauses flow,
therefore the session looks frozen.
You can check with
$ stty -a
To remove the mappings, change the terminal characteristics to
undefine the aforementioned special characters (i.e. stop and
start):
# stty stop undef
# stty start undef
Toggle off:
Ctrl+a Ctrl+f
should fix that for the moment.
To remove these mappings automatically at startup you may add the two
preceding commands to your e.g. ~/.bashrc file.
Scrolling through a huge amount of torrents is tedious, and one can
only scroll from one to the other without the ability to skip pages or
skip to the next first letter like jump to the next torrent
beginning with an H. But torrents can be filtered:
AltGr+End
opens the filter> prompt, and bar stre lists all
torrents containing Barbra Streisand in its name. Search is
case-insensitive. You can filter for regular expressions also, but using
RE may put some heavy load on the machine.
A new empty filtering ends the filtering.
Disable SSL verification
Usually you want a secured connection to the tracker to avoid MITM
attacks or your provider or other third party snooping your traffic. But
some trackers mess up their SSL renewal process from time to time. If
you consider your ratio more valueable than encrypted traffic, you might
add
network.http.ssl_verify_peer.set=0
to your config. Remember to comment it out if not needed anymore and
consider to reset your passkey. Furthermore, certificate checking can be
enabled or disabled for all trackers, not seperately for each
tracker.
A configuration template
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed.
# Uncomment the options you wish to enable.
#
# .rtorrent.rc for /path/to/data
pieces.sync.always_safe = yes
# Maximum and minimum number of peers to connect to per torrent.
# Many simultaneous up/ downloads and my old access point freaks out.
min_peers = 1
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 1
max_peers_seed = 40
# Maximum number of simultanious uploads per torrent.
max_uploads = 20
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0
# disable SSL verification. Do not uncomment unless you know what you're doing.
#network.http.ssl_verify_peer.set=0
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = ~/rtorrentsession/
# Periodically save session data
schedule = session_save,500,120,session_save=
# Watch a directory for new torrents, save to corresponding folders and
# stop those that have been deleted.
schedule = watch_directory_1,30,90,"load.start=/path/to/data/abc/*.torrent,d.set_directory=/path/to/data/ABC/"
schedule = watch_directory_2,30,90,"load.start=/path/to/data/def/*.torrent,d.set_directory=/path/to/data/DEF/"
schedule = watch_directory_3,30,90,"load.start=/path/to/data/ghi/*.torrent,d.set_directory=/path/to/data/GHI/"
schedule = watch_directory_4,30,90,"load.start=/path/to/data/jkl/*.torrent,d.set_directory=/path/to/data/JKL/"
schedule = watch_directory_5,30,90,"load.start=/path/to/data/mno/*.torrent,d.set_directory=/path/to/data/MNO/"
schedule = watch_directory_6,30,90,"load.start=/path/to/data/pqr/*.torrent,d.set_directory=/path/to/data/PQR/"
# Restart torrents that have been copied back…
schedule = tied_directory,5,15,start_tied=
#… and stop those that have been deleted
schedule = untied_directory,5,15,close_untied=
# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=50G
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
# ip = 91.121.112.71
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 40000-59999
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry
#,prefer_plaintext
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
# Sort the main view by ratio
view.sort_current = main,greater=d.get_ratio=
view.sort_new = main,less=d.get_ratio=
view.sort = main
# Sort the seeding view by the upload rate and only show torrents with peers
view.sort_current = seeding,greater=d.get_up_rate=
view.filter = seeding,"and=d.get_complete=,d.get_peers_connected="
view.sort_new = seeding,less=d.get_up_rate=
view.sort = seeding
# Sort the leeching view by name
view.sort_current = leeching,greater=d.get_name=
view.sort_new = leeching,greater=d.get_name=
view.sort = leeching
# Filter the active view by connected peers
view.sort_current = active,less=d.get_name=
view.sort_new = leeching,less=d.get_name=
view.filter = active,d.get_peers_connected=
view.sort = active
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 64
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
Documentation on rtorrent is scarce and spread all
over the interwebs. Some options are self-explanatory, some are tricky,
and for some features there is not a hint on the man page.
This config lets you
· deal with seperate trackers
· keep the .torrent files in respective directories
· watch these directories for new torrents
· prefer encrypted connections
Probably there is no point in encrypted traffic, as it uses RC4 as
encryption algorithm, which is broken for years.
The numbers in like
schedule = tied_directory,5,15,start_tied=
mean task done for the first time 5 seconds after starting, then
every 15 seconds.
Basics
Control start / stopped state
^s – Start download item. Runs hash first unless already done.
^d – Stop an active download item, or remove a stopped one.
^k – Stop item and close all files, also set 'ignore commands' flag.
Global throttling
a|s|d – Increase the upload throttle by 1/5/50 KiB.
z|x|c – Decrease the upload throttle by 1/5/50 KiB.
A|S|D – Increase the download throttle by 1/5/50 KiB.
Z|X|C – Decrease the download throttle by 1/5/50 KiB.
Other general keys
‹up›|‹down› – Select an item.
‹left› – Go back to the previous screen.
^o – Set new download directory on a closed item.
^x – Open a prompt for rTorrent commands.
^q – Exit rTorrent (press twice to skip 'stop' tracker announces).
Errors & Warnings
A tracker returns a HTTP 5xx status page, or a similar HTML
response
Tracker: [Could not parse bencoded data]
When trying to load corrupt metafiles
Could not create download, the input is not a valid torrent
Data of an item is changed or removed, after it is marked as
complete;
recover by pressing Ctrl+kCtrl+eCtrl+r, then possibly Ctrl+s to re-download.
Download registered as completed, but hash check returned unfinished chunks.
Flow control
If you access rtorrent on another machine by screen, there are some
caveats with flow control. The remote terminal and rtorrent may use same
commands.
For rtorrent, Ctrl+s starts a torrent, and
Ctrl+q quits the application.
For the remote terminal, Ctrl+s is often used for terminal
control to stop screen output while Ctrl+q is used to start
it, so Ctrl+s instead of starting a torrent pauses flow,
therefore the session looks frozen.
You can check with
$ stty -a
To remove the mappings, change the terminal characteristics to
undefine the aforementioned special characters (i.e. stop and
start):
# stty stop undef
# stty start undef
Toggle off:
Ctrl+a Ctrl+f
should fix that for the moment.
To remove these mappings automatically at startup you may add the two
preceding commands to your e.g. ~/.bashrc file.
Scrolling through a huge amount of torrents is tedious, and one can
only scroll from one to the other without the ability to skip pages or
skip to the next first letter like jump to the next torrent
beginning with an H. But torrents can be filtered:
AltGr+End
opens the filter> prompt, and bar stre lists all
torrents containing Barbra Streisand in its name. Search is
case-insensitive. You can filter for regular expressions also, but using
RE may put some heavy load on the machine.
A new empty filtering ends the filtering.
Disable SSL verification
Usually you want a secured connection to the tracker to avoid MITM
attacks or your provider or other third party snooping your traffic. But
some trackers mess up their SSL renewal process from time to time. If
you consider your ratio more valueable than encrypted traffic, you might
add
network.http.ssl_verify_peer.set=0
to your config. Remember to comment it out if not needed anymore and
consider to reset your passkey. Furthermore, certificate checking can be
enabled or disabled for all trackers, not seperately for each
tracker.
A configuration template
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed.
# Uncomment the options you wish to enable.
#
# .rtorrent.rc for /path/to/data
pieces.sync.always_safe = yes
# Maximum and minimum number of peers to connect to per torrent.
# Many simultaneous up/ downloads and my old access point freaks out.
min_peers = 1
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 1
max_peers_seed = 40
# Maximum number of simultanious uploads per torrent.
max_uploads = 20
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0
# disable SSL verification. Do not uncomment unless you know what you're doing.
#network.http.ssl_verify_peer.set=0
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = ~/rtorrentsession/
# Periodically save session data
schedule = session_save,500,120,session_save=
# Watch a directory for new torrents, save to corresponding folders and
# stop those that have been deleted.
schedule = watch_directory_1,30,90,"load.start=/path/to/data/abc/*.torrent,d.set_directory=/path/to/data/ABC/"
schedule = watch_directory_2,30,90,"load.start=/path/to/data/def/*.torrent,d.set_directory=/path/to/data/DEF/"
schedule = watch_directory_3,30,90,"load.start=/path/to/data/ghi/*.torrent,d.set_directory=/path/to/data/GHI/"
schedule = watch_directory_4,30,90,"load.start=/path/to/data/jkl/*.torrent,d.set_directory=/path/to/data/JKL/"
schedule = watch_directory_5,30,90,"load.start=/path/to/data/mno/*.torrent,d.set_directory=/path/to/data/MNO/"
schedule = watch_directory_6,30,90,"load.start=/path/to/data/pqr/*.torrent,d.set_directory=/path/to/data/PQR/"
# Restart torrents that have been copied back…
schedule = tied_directory,5,15,start_tied=
#… and stop those that have been deleted
schedule = untied_directory,5,15,close_untied=
# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=50G
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
# ip = 91.121.112.71
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 40000-59999
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry
#,prefer_plaintext
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
# Sort the main view by ratio
view.sort_current = main,greater=d.get_ratio=
view.sort_new = main,less=d.get_ratio=
view.sort = main
# Sort the seeding view by the upload rate and only show torrents with peers
view.sort_current = seeding,greater=d.get_up_rate=
view.filter = seeding,"and=d.get_complete=,d.get_peers_connected="
view.sort_new = seeding,less=d.get_up_rate=
view.sort = seeding
# Sort the leeching view by name
view.sort_current = leeching,greater=d.get_name=
view.sort_new = leeching,greater=d.get_name=
view.sort = leeching
# Filter the active view by connected peers
view.sort_current = active,less=d.get_name=
view.sort_new = leeching,less=d.get_name=
view.filter = active,d.get_peers_connected=
view.sort = active
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 64
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
Documentation on rtorrent is scarce and spread all
over the interwebs. Some options are self-explanatory, some are tricky,
and for some features there is not a hint on the man page.
This config lets you
· deal with seperate trackers
· keep the .torrent files in respective directories
· watch these directories for new torrents
· prefer encrypted connections
Probably there is no point in encrypted traffic, as it uses RC4 as
encryption algorithm, which is broken for years.
The numbers in like
schedule = tied_directory,5,15,start_tied=
mean task done for the first time 5 seconds after starting, then
every 15 seconds.
Basics
Control start / stopped state
^s – Start download item. Runs hash first unless already done.
^d – Stop an active download item, or remove a stopped one.
^k – Stop item and close all files, also set 'ignore commands' flag.
Global throttling
a|s|d – Increase the upload throttle by 1/5/50 KiB.
z|x|c – Decrease the upload throttle by 1/5/50 KiB.
A|S|D – Increase the download throttle by 1/5/50 KiB.
Z|X|C – Decrease the download throttle by 1/5/50 KiB.
Other general keys
‹up›|‹down› – Select an item.
‹left› – Go back to the previous screen.
^o – Set new download directory on a closed item.
^x – Open a prompt for rTorrent commands.
^q – Exit rTorrent (press twice to skip 'stop' tracker announces).
Errors & Warnings
A tracker returns a HTTP 5xx status page, or a similar HTML
response
Tracker: [Could not parse bencoded data]
When trying to load corrupt metafiles
Could not create download, the input is not a valid torrent
Data of an item is changed or removed, after it is marked as
complete;
recover by pressing Ctrl+kCtrl+eCtrl+r, then possibly Ctrl+s to re-download.
Download registered as completed, but hash check returned unfinished chunks.
Flow control
If you access rtorrent on another machine by screen, there are some
caveats with flow control. The remote terminal and rtorrent may use same
commands.
For rtorrent, Ctrl+s starts a torrent, and
Ctrl+q quits the application.
For the remote terminal, Ctrl+s is often used for terminal
control to stop screen output while Ctrl+q is used to start
it, so Ctrl+s instead of starting a torrent pauses flow,
therefore the session looks frozen.
You can check with
$ stty -a
To remove the mappings, change the terminal characteristics to
undefine the aforementioned special characters (i.e. stop and
start):
# stty stop undef
# stty start undef
Toggle off:
Ctrl+a Ctrl+f
should fix that for the moment.
To remove these mappings automatically at startup you may add the two
preceding commands to your e.g. ~/.bashrc file.
Scrolling through a huge amount of torrents is tedious, and one can
only scroll from one to the other without the ability to skip pages or
skip to the next first letter like jump to the next torrent
beginning with an H. But torrents can be filtered:
AltGr+End
opens the filter> prompt, and bar stre lists all
torrents containing Barbra Streisand in its name. Search is
case-insensitive. You can filter for regular expressions also, but using
RE may put some heavy load on the machine.
A new empty filtering ends the filtering.
Disable SSL verification
Usually you want a secured connection to the tracker to avoid MITM
attacks or your provider or other third party snooping your traffic. But
some trackers mess up their SSL renewal process from time to time. If
you consider your ratio more valueable than encrypted traffic, you might
add
network.http.ssl_verify_peer.set=0
to your config. Remember to comment it out if not needed anymore and
consider to reset your passkey. Furthermore, certificate checking can be
enabled or disabled for all trackers, not seperately for each
tracker.
A configuration template
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed.
# Uncomment the options you wish to enable.
#
# .rtorrent.rc for /path/to/data
pieces.sync.always_safe = yes
# Maximum and minimum number of peers to connect to per torrent.
# Many simultaneous up/ downloads and my old access point freaks out.
min_peers = 1
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 1
max_peers_seed = 40
# Maximum number of simultanious uploads per torrent.
max_uploads = 20
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0
# disable SSL verification. Do not uncomment unless you know what you're doing.
#network.http.ssl_verify_peer.set=0
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = ~/rtorrentsession/
# Periodically save session data
schedule = session_save,500,120,session_save=
# Watch a directory for new torrents, save to corresponding folders and
# stop those that have been deleted.
schedule = watch_directory_1,30,90,"load.start=/path/to/data/abc/*.torrent,d.set_directory=/path/to/data/ABC/"
schedule = watch_directory_2,30,90,"load.start=/path/to/data/def/*.torrent,d.set_directory=/path/to/data/DEF/"
schedule = watch_directory_3,30,90,"load.start=/path/to/data/ghi/*.torrent,d.set_directory=/path/to/data/GHI/"
schedule = watch_directory_4,30,90,"load.start=/path/to/data/jkl/*.torrent,d.set_directory=/path/to/data/JKL/"
schedule = watch_directory_5,30,90,"load.start=/path/to/data/mno/*.torrent,d.set_directory=/path/to/data/MNO/"
schedule = watch_directory_6,30,90,"load.start=/path/to/data/pqr/*.torrent,d.set_directory=/path/to/data/PQR/"
# Restart torrents that have been copied back…
schedule = tied_directory,5,15,start_tied=
#… and stop those that have been deleted
schedule = untied_directory,5,15,close_untied=
# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=50G
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
# ip = 91.121.112.71
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 40000-59999
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry
#,prefer_plaintext
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
# Sort the main view by ratio
view.sort_current = main,greater=d.get_ratio=
view.sort_new = main,less=d.get_ratio=
view.sort = main
# Sort the seeding view by the upload rate and only show torrents with peers
view.sort_current = seeding,greater=d.get_up_rate=
view.filter = seeding,"and=d.get_complete=,d.get_peers_connected="
view.sort_new = seeding,less=d.get_up_rate=
view.sort = seeding
# Sort the leeching view by name
view.sort_current = leeching,greater=d.get_name=
view.sort_new = leeching,greater=d.get_name=
view.sort = leeching
# Filter the active view by connected peers
view.sort_current = active,less=d.get_name=
view.sort_new = leeching,less=d.get_name=
view.filter = active,d.get_peers_connected=
view.sort = active
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 64
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"