Everstart 6811a Smart Charger Manual 2021 |work|

The digital display will show the voltage or percentage of charge. The unit stops charging automatically when the battery is full.

Connect the charger to a grounded GFCI outlet.

Attach to the positive (+) terminal of the battery.

The you are charging (AGM, Gel, or Standard Lead-Acid) everstart 6811a smart charger manual 2021

: Wipe the cords clean with a dry cloth after every use to prevent cracking.

: Keep flames, cigarettes, and sparks away from the battery.

In addition to fault codes, your EverStart charger may display the following operational codes: The digital display will show the voltage or

Ensure the battery is a 12V system. The 6811A is not designed for 6V systems.

: Attach the red clamp to the positive (+) battery post and the black clamp to the negative (-) battery post or a grounded metal part of the vehicle frame.

: Wrong mode selected (e.g., 12V mode selected for a 6V battery). Attach to the positive (+) terminal of the battery

But just as John was about to breathe a sigh of relief, the charger's alarm suddenly went off. The manual had warned him about this possibility, explaining that the charger would alert him if it detected any issues during the charging process.

Uses a multi-stage charging process to prevent overcharging.

Once the battery reaches full capacity, the device automatically switches to .