Bushnell 3-9x40eg | Manual

Settings usually range from 1 to 5 or higher. Use the lowest setting possible to avoid glare, which can hide the target.

Tighten the ring screws evenly in a cross-pattern (like tightening lug nuts on a car tire). Do not over-tighten, as crushing the 1-inch tube will permanently damage the internal tracking components. If using a torque wrench, aim for 15–18 inch-pounds for the top rings. Step 2: Focusing the Reticle

Move your target out to 100 yards. Fire another 3-shot group. At 100 yards, of bullet movement. Make your final fine adjustments, replace the turret caps, and your rifle is successfully zeroed. Cleaning and Maintenance

The 3-9x40eg is typically a "parallax fixed" scope, set for 100 yards. This means at 9x power, if your eye moves behind the scope, the crosshairs might shift slightly. The manual instructs you to always center your eye behind the scope for maximum accuracy. bushnell 3-9x40eg manual

, focusing on its technical specifications, installation procedures, and operational maintenance. The "EG" designation typically refers to an (and Red) illuminated reticle, a feature designed to enhance target acquisition in various lighting conditions. Technical Specifications Magnification Range : 3x to 9x adjustable zoom.

Move the scope forward or backward until you have a full, clear field of view (usually 3–4 inches from your eye).

Proper mounting is crucial for accuracy and safety. The manual typically provides the following guidelines: Settings usually range from 1 to 5 or higher

Understanding the layout and physical specifications of your optic helps ensure proper mounting and compatibility with your rifle. 3x to 9x (variable power) Objective Lens Diameter: 40mm Tube Diameter: 1 inch (25.4mm)

The "3-9x40" designation refers to the magnification range (3x to 9x) and the . Tube Diameter : Standard 1-inch (25.4mm) tube.

Tighten the ring screws in a "star" pattern to ensure even pressure. Do not over-tighten , as this can crush the scope tube. 3. Focusing the Reticle (Diopter Adjustment) Before zeroing, you must adjust the scope to your eye. Do not over-tighten, as crushing the 1-inch tube

This article is a third‑party informational guide. It is not a substitute for the official manufacturer’s documentation or professional gunsmithing advice. Always follow your local laws and regulations regarding firearm and airgun use.

Illuminated Rangefinder / Mil-Dot (typically Red and Green) Brightness Settings: 5 levels for red, 5 levels for green

: Confirm your zero at 100 yards by firing a 3-shot group and making final micro-adjustments. Reticle Illumination