Thyssenkrupp Levant Stair Lift Installation Manual Top Jun 2026

: Tighten the cam securely so the lift stops automatically at the exact landing height. 4. Anchoring the Top Brackets

Reinstall the bottom mechanical end-stop bracket immediately to prevent the carriage from accidentally slipping off the track. Step 2: Installing the Seat Assembly Locate the mounting post on top of the drive chassis.

The Levant installation process is split into three primary phases: rail mounting, carriage placement, and seat assembly. 1. Positioning and Securing the Rail thyssenkrupp levant stair lift installation manual top

Once the rail is secure, it is time to attach the lifting mechanism.

Run the lift to the very top and bottom to ensure it stops automatically and smoothly. : Tighten the cam securely so the lift

Identify a standard, dedicated electrical outlet near either the top or bottom of the stairs. The outlet should be within reach of the transformer cable without requiring an extension cord.

Verify that the stair treads are solid. The stair lift rail anchors directly into the steps (treads), not the wall. Softwood, hardwood, and concrete steps are suitable; heavily decayed or unstable treads must be replaced prior to installation. Required Tools Checklist Precision digital level (minimum 24 inches) Step 2: Installing the Seat Assembly Locate the

The Levant runs on battery power, requiring careful electrical setup.

Welcome to the top-level installation guide for the thyssenkrupp Levant stair lift. This concise, user-friendly overview highlights the essential steps, safety checks, and practical tips installers need to set up the Levant quickly, reliably, and with passenger comfort in mind.

Secure the brackets tightly, checking the rail with a spirit level to ensure it remains completely straight and twist-free. Step 3: Installing the Drive Chassis (Carriage)