: Turn the machine off and back on to complete the reset process. Hardware Causes to Investigate
If the value is , change it to 1 (Connect) . Check Physical Connections :
translates to a communication failure between the controller board (the printer’s “brain”) and the operation panel (the touchscreen). Specifically, the suffix “-10” often indicates a data mismatch, firmware corruption, or a problem with the panel’s boot process. sc673-10 ricoh error
Unplug the harness connectors from both ends (the controller board side and the back of the operation panel). Inspect the pins for bends, corrosion, or breakage.
Seeing the error code on your Ricoh, Savin, or Lanier multifunction printer can instantly halt your office productivity. This specific code indicates a critical communication failure within the machine's internal architecture. : Turn the machine off and back on
If the hard reboot fails, the internal connection parameter may have defaulted to a deactivated state. You must correct this in the system's Service Program (SP) Mode.
When this error triggers, the problem usually lies within the connection, power delivery, or the hardware components linking the main body of the printer to the display panel. The most common culprits include: Specifically, the suffix “-10” often indicates a data
Several factors can disrupt the communication channel between the controller and the display panel:
Ricoh multifunction printers are reliable workhorses, but they occasionally display service codes that halt operations. One such frustrating issue is .
Swap out the operation panel harness with a new one to rule out hidden wire breaks.