If you have acquired a new-old-stock (NOS) machine or one that has been stored long-term, it will be covered in a thick anti-rust grease (cosmoline). Clean all surfaces using mineral spirits or kerosene.
Check for proper gear engagement and backlash in the carriage.
The Emco Compact 5 utilizes a change-gear system to match the spindle rotation to the lead screw pitch for threading.
: Loosen the quadrant bracket bolt, swap the gears on the spindle, idler, and leadscrew shafts, and set the gear backlash using a strip of paper as a spacer.
Threading requires the correct gear configuration, which is detailed in the thread chart. Always ensure the gear train is well-lubricated. 5. Exclusive Maintenance Tips (Beyond the Manual) emco compact 5 manual exclusive
If you own a metric machine, cutting imperial threads requires an exclusive 21/50 teeth transposing gear combination. Refer to your manual's specific gear matrix insert to ensure your longitudinal feed matches the desired Threads Per Inch (TPI). Essential Accessories Highlighted in the Manual
He paid the man.
Engages the leadscrew for automatic feeding. Top Slide: Swivels 360 degrees for taper turning. 4. Maintenance and Lubrication Schedule
Klaus knelt. His knees cracked. But his eyes widened like a child’s. If you have acquired a new-old-stock (NOS) machine
: It can be converted into a multi-purpose machine using the optional milling and drilling head . Key Components and Operation
Understanding the baseline capabilities of your machine ensures safe operation. 100 mm Distance Between Centers: 350 mm Spindle Speed Range: 50 to 2800 RPM Motor Power: 500 Watts Spindle Bore: 16 mm Tailstock Taper: Morse Taper 1 (MT1) 2. Unboxing and Initial Set-Up
The Emco Compact 5 isn’t like modern, disposable benchtop lathes. It is a modular system. The manual doesn’t just tell you how to turn the handwheels; it explains the machine’s unique geometry and how to integrate its wide array of accessories. 1. Understanding Machine Specifications
Once you obtain the manual:
Use the designated mounting holes in the lathe feet. Do not overtighten, as this can twist the bed.
The Emco Compact 5 CNC is a landmark machine tool produced by Emco Maier (Austria). Bridging the gap between traditional bench lathes and industrial CNC machinery, it offers a unique hybrid capability: it can function as a standard manual lathe while possessing the electronics to run G-code programs.
Whether you are a seasoned machinist or a beginner setting up your workshop, having a comprehensive understanding of the ecosystem is vital. This exhaustive guide serves as your ultimate reference manual for operating, maintaining, and upgrading this classic machine. 1. Introduction to the Emco Compact 5
